| ZONE | STATES | DELIVERY | COST (AUD) |
|---|---|---|---|
| NSW & QLD | New South Wales, Queensland | 2–10 business days | $50.00 |
| VIC & ACT | Victoria, ACT | 2–10 business days | $75.00 |
| WA TAS NT SA | Western Australia, Tasmania, NT, South Australia | 2–10 business days | $135.00 |
Standard shipping. Orders dispatched within 1–2 business days.
This table is a guide. Shipping rates can be subject to change.
| DESTINATION | COUNTRIES | DELIVERY | COST |
|---|---|---|---|
| AMERICAS | |||
| USA | United States DUTIES & TAXES PAID | 3–14 business days | $285 USD |
| CANADA | Canada | 3–14 business days | $390 AUD |
| EUROPE & MIDDLE EAST | |||
| UK | United Kingdom | 3–14 business days | £230 GBP |
| PORTUGAL & SPAIN | Portugal, Spain | 3–14 business days | €270 EUR |
| EUROPE | Austria, Belgium, Czechia, Denmark, Finland, France, Germany, Ireland, Italy, Netherlands, Norway, Sweden, Switzerland, Slovenia, Poland, Bulgaria, Croatia, Estonia, Greece, Hungary, Latvia, Lithuania, Luxembourg, Malta, Monaco, Romania, Slovakia, Ukraine | 3–14 business days | $440 AUD |
| UAE | United Arab Emirates | 3–14 business days | 1,320 AED |
| PACIFIC & ASIA | |||
| NZ | New Zealand | 3–14 business days | $269 AUD |
| SINGAPORE | Singapore | 3–14 business days | $270 AUD |
| MALAYSIA & MORE | Malaysia, Hong Kong, Taiwan | 3–14 business days | $390 AUD |
| FIJI | Fiji | 3–14 business days | $540 AUD |
| JAPAN | Japan | 3–14 business days | ¥32,500 JPY |
| INDONESIA | Indonesia | 3–14 business days | Rp3,300,000 |
| TAHITI | French Polynesia, South Africa | 3–14 business days | Fr39,000 XPF |
International orders may be subject to customs duties and taxes payable by the recipient, unless stated otherwise.
This table is a guide. Shipping rates can be subject to change.
THE STRUCTURE
Hydrofoil boards rely on a rigid sandwich structure to handle the high torsional loads and stress of hydrofoiling. Amos Shapes Foilboards are built exactly to this standard — an EPS foam core, reinforced with high density foam inserts, wrapped in fibreglass and an outer carbon fibre skin.
VACUUM BAGGING
Each board is vacuum bagged to consolidate the laminate under pressure, removing excess resin and ensuring a consistent, lightweight shell — resulting in the best stiffness to weight ratio possible.
FOIL TEC TRACKS
We use Foil Tec Tracks — purpose-built for foiling, and have been developed alongside Amos Shapes specifically for the foiling industry. They are built to handle the loads of foil riding without adding unnecessary weight.
Our boards are made in house at our Northern Rivers, NSW glassing factory. Amos and our team of very talented board builders are dedicated to making the best possible foilboards. They are always trying new techniques, designs and ideas and continue to push innovation in the foiling industry.
We are always making stock boards however they can often sell out before we get them up online. We encourage customers to place your order via our webpage so you can secure the right board for you. Or if you do not want to wait, check out our boards in stock page, which is updated regularly as stock comes in.
RETURNS
Amos Shapes has a 30 day return policy as long as your product remains unridden/unused and in its original condition.
WARRANTY
We offer a 6 month warranty on manufacturing defects. This does not include general wear and tear such as pressure dints, dings or heat delamination.
See full warranty ↗HEAT & SUN
Do not leave your board in the sun or in prolonged heat (including the car). Carbon boards heat up very quickly and this will cause delamination. This will void your warranty.
AIR VALVE
The air valve is self-regulating and should not be unscrewed or left out at any time. It regulates pressure in the blank to reduce pressure changes and help your board last longer. It will not stop delamination if the board is left in the sun or prolonged heat.
SCREWS
Only use the screws provided with your Amos Shapes board for your foot strap inserts. If you need to replace your screws please contact Amos Shapes. Using any other screws will void warranty.
INSTALLATION
Do not use power tools to install your foil or foot strap inserts as this will almost certainly cause damage to your board. Screws should always be installed using hand tools and not over tightened.
FOIL T-NUTS
We use high quality track inserts. Occasionally on a new board your T-nuts from your foil will be tight to get in. We suggest tuning your T-nuts by lightly filing along the long edge until you achieve the correct fit.
DAMAGE
If your board has been damaged do not ride it. Have your board repaired by a professional using epoxy resins only.
Raptor | All-Rounder Surf or Tow Foilboard
Best for Prone and Tow -an all round balanced foilboard
Size Guide
The Raptor Prone Foilboard is purpose-built for both prone and tow foiling. Designed with a surfboard-inspired outline and evenly distributed volume, it provides excellent paddle power and smooth entry into waves, making it efficient through the lineup and reliable in all conditions.
A refined, reduced tail area minimises rail engagement through turns, giving riders increased control, and ability to make more critical turns at high speeds without touchdowns.
This board is ideal for low intermediate to advanced foilers seeking a well-balanced, high-performance prone foil board that excels in both paddling and tow setups.
Features:
-
Even volume distribution for easy paddling and stable takeoffs
-
Concave deck for better sensitivity to the foil
-
Tail outline refined for minimal touch downs during turns
-
Foil Tec traction pad
-
Foil Tec 300mm tracks
** Due to a high demand, we currently have a 7-8 week manufacturing time. Please check our Boards in Stock page for boards available now.
|
Length |
Width |
Thickness |
Volume |
|
4’2” |
18 ½” |
2 11/16” |
26L |
|
4’4” |
18 3/4” |
2 15/16” |
30L |
|
4’6” |
19” |
3 1/8” |
34L |
All Amos Shapes boards are built start to finish in our Australian factory using carbon vacuum bag construction, EPS foam, and epoxy resins—delivering the best strength-to-weight ratio for serious performance foiling.
Description
The Raptor Prone Foilboard is purpose-built for both prone and tow foiling. Designed with a surfboard-inspired outline and evenly distributed volume, it provides excellent paddle power and smooth entry into waves, making it efficient through the lineup and reliable in all conditions.
A refined, reduced tail area minimises rail engagement through turns, giving riders increased control, and ability to make more critical turns at high speeds without touchdowns.
This board is ideal for low intermediate to advanced foilers seeking a well-balanced, high-performance prone foil board that excels in both paddling and tow setups.
Features:
-
Even volume distribution for easy paddling and stable takeoffs
-
Concave deck for better sensitivity to the foil
-
Tail outline refined for minimal touch downs during turns
-
Foil Tec traction pad
-
Foil Tec 300mm tracks
** Due to a high demand, we currently have a 7-8 week manufacturing time. Please check our Boards in Stock page for boards available now.
|
Length |
Width |
Thickness |
Volume |
|
4’2” |
18 ½” |
2 11/16” |
26L |
|
4’4” |
18 3/4” |
2 15/16” |
30L |
|
4’6” |
19” |
3 1/8” |
34L |
All Amos Shapes boards are built start to finish in our Australian factory using carbon vacuum bag construction, EPS foam, and epoxy resins—delivering the best strength-to-weight ratio for serious performance foiling.
Choose options