Shipping
| Zone | States | Delivery | Cost (AUD) |
|---|---|---|---|
| QLD & NSW | Queensland, New South Wales | 2–8 business days | $150.00 |
| VIC & ACT | Victoria, Australian Capital Territory | 2–8 business days | $190.00 |
| WA, TAS, NT & SA | Western Australia, Tasmania, Northern Territory, South Australia | 2–8 business days | $350.00 |
Standard shipping. Orders dispatched within 1–2 business days.
This table is a guide. Shipping rates can be subject to change.
| Destination | Countries | Delivery | Cost |
|---|---|---|---|
| Americas | |||
| USA | United States | 3–14 business days | $400 USD |
| Canada | Canada | 3–14 business days | $550 AUD |
| Europe & Middle East | |||
| UK | United Kingdom | 3–14 business days | £290 GBP |
| UAE | United Arab Emirates | 3–14 business days | د.إ1,615 AED |
| Rest of Europe | Austria, Belgium, Czechia, Denmark, Finland, France, Germany, Ireland, Israel, Italy, Netherlands, Norway, Poland, Portugal, Spain, Sweden, Switzerland, Slovenia, Bulgaria, Croatia, Estonia, Greece, Hungary, Latvia, Lithuania, Luxembourg, Malta, Monaco, Romania, Slovakia, Ukraine | 3–14 business days | $550 AUD |
| Pacific & Asia | |||
| New Zealand | New Zealand | 3–14 business days | $350 AUD |
| Singapore | Singapore | 3–14 business days | $400 AUD |
| Japan | Japan | 3–14 business days | ¥43,000 JPY |
| Fiji | Fiji | 3–14 business days | $745 AUD |
| Indonesia | Indonesia | 3–14 business days | Rp4,500,000 |
| Tahiti | French Polynesia | 3–14 business days | Fr52,000 XPF |
| Hong Kong, Malaysia & South Korea | Hong Kong, Malaysia, South Korea | 3–14 business days | $550 AUD |
International orders may be subject to customs duties and taxes payable by the recipient, unless stated otherwise.
This table is a guide. Shipping rates can be subject to change.
🌎 Please contact us if shipping is not available to your country. We can ship worldwide.
✈ Airport pick up available for larger boards - please email us for a quote.
Construction
Hydrofoil boards rely on a rigid sandwich structure to handle the high torsional loads and stress of hydrofoiling. Amos Shapes Foilboards are built exactly to this standard - an EPS foam core, reinforced with high density foam inserts, wrapped in fibreglass and an outer carbon fibre skin.
Vacuum bagging
Each board is vacuum bagged to consolidate the laminate under pressure, removing excess resin and ensuring a consistent, lightweight shell - resulting in the best stiffness to weight ratio possible.
Foil Tec Tracks
We use Foil Tec Tracks - purpose-built for foiling, and have been developed alongside Amos Shapes specifically for the foiling industry. They are built to handle the loads of foil riding without adding unnecessary weight.
Manufacturing
Our boards are made in house at our Northern Rivers, NSW glassing factory. Amos and our team of very talented board builders are dedicated to making the best possible foilboards. They are always trying new techniques, designs and ideas and continue to push innovation in the foiling industry.
We are always making stock boards however they can often sell out before we get them up online. We encourage customers to place your order via our webpage so you can secure the right board for you. Or if you do not want to wait, check out our boards in stock page, which is updated regularly as stock comes in.
Returns & Warranty
Amos Shapes has a 30 day return policy as long as your product remains unridden/unused and in its original condition.
Warranty 6 month warranty
We offer a 6 month warranty on manufacturing defects. This does not include general wear and tear such as pressure dints, dings or heat delamination.
See full warranty ↗Care Instructions
Do not leave your board in the sun or in prolonged heat (including the car). Carbon boards heat up very quickly and this will cause delamination. This will void your warranty.
The air valve is self-regulating and should not be unscrewed or left out at any time. It regulates pressure in the blank to reduce pressure changes and help your board last longer. It will not stop delamination if the board is left in the sun or prolonged heat.
Only use the screws provided with your Amos Shapes board for your foot strap inserts. If you need to replace your screws please contact Amos Shapes. Using any other screws will void warranty.
Do not use power tools to install your foil or foot strap inserts as this will almost certainly cause damage to your board. Screws should always be installed using hand tools and not over tightened.
We use high quality track inserts. Occasionally on a new board your T-nuts from your foil will be tight to get in. We suggest tuning your T-nuts by lightly filing along the long edge until you achieve the correct fit.
If your board has been damaged do not ride it. Have your board repaired by a professional using epoxy resins only.
Sultan Prone/Wing | High Volume Prone | Low Volume Wingboard
This narrower design is aimed at minimising surface area drag on the hull, resulting in a faster take off’s in lighter winds
Size Guide
** All boards, unless shown on the Boards in Stock Page, have an 8-9 manufacturing time. This can vary depending on how busy we are at the time.
The Sultan Wing has been designed with input from Adam Bennetts (@misterbennets) and is a result of the recent trend in the downwind SUP and prone progression. With the popularity of the longer outline and riding more streamlined boards – this narrower design is aimed at minimising surface area drag on the hull, resulting in a faster take off’s in lighter winds.
The nose of the Sultan Wing has a displacement hull running into a squarer boxy rail towards the tail to maximise stability. The volume is distributed evenly throughout the board with a very parallel outline which gives a nicely balanced feel when up on foil.
* This board has a build time of approximately 7-8 weeks. Please check our Boards in Stock page for updated stock levels.
|
Length |
Width |
Thickness |
Volume |
|
5’0” |
18” |
4 5/8” |
55L |
|
5’5” |
19” |
4 7/8” |
65L |
|
5’10” |
20” |
4 13/16” |
75L |
Features:
- Foil Tec 15.75" / 400mm Tracks
- Flatter Deck
- Foot strap options
- Carbon vacuum bag construction
- Air vent and Leash plug
- Foil Tec DW SUP six-piece traction
Amos Shapes only uses the highest quality materials available in order to build your premium foiling product.
Description
** All boards, unless shown on the Boards in Stock Page, have an 8-9 manufacturing time. This can vary depending on how busy we are at the time.
The Sultan Wing has been designed with input from Adam Bennetts (@misterbennets) and is a result of the recent trend in the downwind SUP and prone progression. With the popularity of the longer outline and riding more streamlined boards – this narrower design is aimed at minimising surface area drag on the hull, resulting in a faster take off’s in lighter winds.
The nose of the Sultan Wing has a displacement hull running into a squarer boxy rail towards the tail to maximise stability. The volume is distributed evenly throughout the board with a very parallel outline which gives a nicely balanced feel when up on foil.
* This board has a build time of approximately 7-8 weeks. Please check our Boards in Stock page for updated stock levels.
|
Length |
Width |
Thickness |
Volume |
|
5’0” |
18” |
4 5/8” |
55L |
|
5’5” |
19” |
4 7/8” |
65L |
|
5’10” |
20” |
4 13/16” |
75L |
Features:
- Foil Tec 15.75" / 400mm Tracks
- Flatter Deck
- Foot strap options
- Carbon vacuum bag construction
- Air vent and Leash plug
- Foil Tec DW SUP six-piece traction
Amos Shapes only uses the highest quality materials available in order to build your premium foiling product.
Choose options
