** Due to a high demand, we currently have a 12 week manufacturing time.  

Watch Josh's video here.

With the infinite popularity of the Kruzer and its success with the Foil Drive System we are now increasing this boards performance with Foil Drive by adding a Recessed Track System (RTS) and Enhanced Connection Window (ECW).   This recess will decrease the resistance of the battery on the bottom of the board for more efficiency in paddling and lift off.  The ECW is a window cut in the carbon on the deck to allow for the Foil Drive blue tooth transmission to travel through the board space easier.  The RTS System is available in 4'8", 4'11", 5'4" and 5'8" Kruzer sizes. 

 This user-friendly foilboard is perfect for all levels, inspired by two years of riding the Raptor and designed by team rider Josh Ku. Seeking to elevate the prone experience, Josh focused on incorporating features from the Raptor such as retaining neutral bottom angle through the 300mm/ 11.81" tracks, while refining the rail outline for enhanced performance. By narrowing the overall width, the KrUzer allows for improved paddle power and reduced excess board in non-essential areas. Its main focus is on maximising paddle speed for a streamlined takeoff, making it a perfect fit for its name.

Inspired by legendary designs like the Gerry Lopez pipeline lightning bolt boards, the KrUzer boasts a distinctive blue base and deck grip design, adding a personal touch to its aesthetics.

Features:

• Recessed Track System (RTS)
• Enhanced Connection Window (ECW)
• Concave deck
• Narrow outline with displacement hull
• Mid Length flow feel
• Pulled in narrow Tail
• Flat through the tracks
• Foil Tec Josh Ku Custom Blue Dot prone traction 

Construction:

• Specifically designed high density inserts for maximised strength where board connects to foil
• Foil Tec 11.81"/ 300mm Tracks
• We use Australian made EPS Foam and the best fibreglass, carbon and epoxy we can get our hands on.
• Carbon vacuum bagged for strength
• Air vent installation included

FAQs

1) Can I change my battery without removing the mast?
This board has been designed for maximum performance with the Foil Drive system alongside team rider Josh Ku and the Foil Drive team. To do this we have made the recess as slimline as we can, the result and feedback is that this board is a rocket in the water and up on foil with Foil Drive. Paul (one of the Foil Drive owners) has said this is “the best board he has ever ridden with Foil Drive”. You will still have to remove your mast to change batteries but Foil Drive are developing new hardware to make battery changes easier (more on this over the next few weeks)

2) Can I ride this board without Foil Drive?
Yes, We have designed this boards recess to fit most major foil brands masts. 

3) What will battery changes look like?
 For a battery change you will have to remove the 4 bolts that attach your Foil Drive to the board. you then have to open the nose cone and replace the battery. To reinstall you will have to latch the nose cone back onto the unit and then reattach the unit and mast to the board via the 4 bolts.

4) Will I need an antenna for bluetooth connection to Foil Drive with this board?
No, in the Kruzer RTS we have installed an Enhanced Connection Window (ECW) in the deck which is located under the logo on the nose of the board and also left a carbon free area in the recess to allow for the best possible connection ability.  In saying this, correct connection technique still needs to be used. Please see Foil Drive YouTube videos for more information on this. https://youtu.be/04LnYsvOnlc?si=KbtIS5mN46vrggQv

5) Can I customise dimensions on Kruzer RTS?
Due to the more technical and time consuming nature of building these boards we are not accepting customisations of dimensions on the RTS models.  

6) Can I use other Foil Drive products with the Kruzer RTS?
Yes you can use the Foil Drive Gen 2 Slim with the performance and endurance batteries . You can also use the Foil Drive Gen 2 Max with the Power and Sport batteries