Shipping
| Zone | States | Delivery | Cost (AUD) |
|---|---|---|---|
| NSW & QLD | New South Wales, Queensland | 2–10 business days | $75.00 |
| ACT, VIC & TAS | Australian Capital Territory, Victoria, Tasmania | 2–10 business days | $95.00 |
| WA, SA & NT | Western Australia, South Australia, Northern Territory | 2–10 business days | $130.00 |
Express shipping. Orders dispatched within 1–2 business days.
This table is a guide. Shipping rates can be subject to change.
| Destination | Countries | Delivery | Cost (AUD) |
|---|---|---|---|
| USA & Canada | |||
| USA | United States | 5–8 business days | $498.00 |
| Canada | Canada | 5–8 business days | $498.00 |
| Europe & Middle East | |||
| UAE | United Arab Emirates | 3–14 business days | $530.00 |
| Rest of World | Includes Austria, Belgium + remaining Europe | 3–14 business days | $498.00 |
| Pacific & Asia | |||
| NZ & Taiwan | New Zealand, Taiwan | 3–14 business days | $350.00 |
| Japan & Singapore | Japan, Singapore | 3–14 business days | $420.00 |
| French Polynesia & Fiji | Fiji, French Polynesia | 3–14 business days | $530.00 |
International orders may be subject to customs duties and taxes payable by the recipient, unless stated otherwise.
This table is a guide. Shipping rates can be subject to change.
🌎 Please contact us if shipping is not available to your country. We can ship worldwide.
Frequently Asked Questions
Can I ride this board without Foil Drive?
Yes, we have designed this board's recess to fit most major foil brands' masts. However if planning to prone foil more than Foil Drive, then we suggest opting for a KrUzer V2 (no trench).
What will battery changes look like?
For the KrUzer V2 RTS you will be able to leave your mast and Foil Drive unit connected to the board. You will just have to remove the nose cone to switch batteries.
Will I need an antenna for bluetooth connection to Foil Drive with this board?
No, in the KrUzer RTS we have installed an Enhanced Connection Window (ECW) in the deck which is located under the logo on the nose of the board, and also left a carbon free area in the recess to allow for the best possible connection ability. In saying this, correct connection technique still needs to be used.
Please see Foil Drive's YouTube video for more information on this.
Can I customise dimensions on the KrUzer RTS?
Due to the more technical and time consuming nature of building these boards, we are not accepting customisations of dimensions on the RTS models.
Can I use other Foil Drive products with the KrUzer RTS?
Yes, you can use the Foil Drive Gen 2 Slim, Max and Fusion units with this RTS design.
Construction
Hydrofoil boards rely on a rigid sandwich structure to handle the high torsional loads and stress of hydrofoiling. Amos Shapes Foilboards are built exactly to this standard - an EPS foam core, reinforced with high density foam inserts, wrapped in fibreglass and an outer carbon fibre skin.
Vacuum bagging
Each board is vacuum bagged to consolidate the laminate under pressure, removing excess resin and ensuring a consistent, lightweight shell - resulting in the best stiffness to weight ratio possible.
Foil Tec Tracks
We use Foil Tec Tracks - purpose-built for foiling, and have been developed alongside Amos Shapes specifically for the foiling industry. They are built to handle the loads of foil riding without adding unnecessary weight.
Manufacturing
Our boards are made in house at our Northern Rivers, NSW glassing factory. Amos and our team of very talented board builders are dedicated to making the best possible foilboards. They are always trying new techniques, designs and ideas and continue to push innovation in the foiling industry.
We are always making stock boards however they can often sell out before we get them up online. We encourage customers to place your order via our webpage so you can secure the right board for you. Or if you do not want to wait, check out our boards in stock page, which is updated regularly as stock comes in.
Returns & Warranty
Amos Shapes has a 30 day return policy as long as your product remains unridden/unused and in its original condition.
Warranty 6 month warranty
We offer a 6 month warranty on manufacturing defects. This does not include general wear and tear such as pressure dints, dings or heat delamination.
See full warranty ↗Care Instructions
Do not leave your board in the sun or in prolonged heat (including the car). Carbon boards heat up very quickly and this will cause delamination. This will void your warranty.
The air valve is self-regulating and should not be unscrewed or left out at any time. It regulates pressure in the blank to reduce pressure changes and help your board last longer. It will not stop delamination if the board is left in the sun or prolonged heat.
Only use the screws provided with your Amos Shapes board for your foot strap inserts. If you need to replace your screws please contact Amos Shapes. Using any other screws will void warranty.
Do not use power tools to install your foil or foot strap inserts as this will almost certainly cause damage to your board. Screws should always be installed using hand tools and not over tightened.
We use high quality track inserts. Occasionally on a new board your T-nuts from your foil will be tight to get in. We suggest tuning your T-nuts by lightly filing along the long edge until you achieve the correct fit.
If your board has been damaged do not ride it. Have your board repaired by a professional using epoxy resins only.
KrUzer V2 RTS | The Next Foil Drive Foilboard
One proven platform. Two configurations. Choose the setup that best suits your style of foiling.
Size Guide
KrUzer V2 RTS - An Update on our Mid-Length Foil Drive Board/ Electric Assist
Available for Pre-Order Now!
The KrUzer V2 RTS takes our bestselling platform and adapts it specifically for Foil Drive and other Electric Assist Systems, combining the proven performance of the KrUzer V2 with our Recessed Trench System (RTS).
Built on the same refined mid-length design, the KrUzer V2 RTS delivers easy paddling, early wave entry, and a direct connection to the foil. The RTS integrates the Foil Drive unit into the board, improving weight distribution, reducing drag, and creating a more balanced feel on the water.
All RTS models are compatible with Foil Drive Fusion, Max, and Slim systems, as well as other assist systems, and feature our Enhanced Connection Window (ECW) for reliable Bluetooth connectivity.
Two RTS Options
The KrUzer V2 RTS is available in two configurations, allowing riders to choose the balance of volume, stability, and performance that best suits their riding. This new RTS design allows the rider to unclip and change the battery without undoing mast base plate screws. **Exception - if riding with the fusion system at the front half of the tracks you may need to move your mast to change batteries.
Pro RTS
The Pro RTS follows the same design philosophy as the KrUzer V2 but with a more performance-oriented feel. This version features a half trench design (1' Recessed Track), where the battery sits slightly proud of the board. This allows the board to maintain a thinner, more performance-focused profile, resulting in a lighter, more nimble, and more responsive ride. Riders looking for a more surf-driven experience and a closer connection to the foil will appreciate the added agility of the Pro RTS.
| Specification | Measurement |
|---|---|
| Trench Width | 7 1/4" / 184 mm |
| Trench Height | 1" / 24 mm |
Regular RTS
The Regular RTS is designed for riders who prioritise stability, ease of use, and maximum compatibility with Foil Drive systems. This version features a full trench design (2" Recessed Track), allowing the battery to sit flush with the base of the board for a clean, integrated setup with reduced drag resulting fast take-offs, and a stable platform both on the water and once flying. This board features ample volume throughout the board - for riders looking for the easiest path to getting up and foiling, this is the most user-friendly option.
| Specification | Measurement |
|---|---|
| Trench Width | 7 1/4" / 184 mm |
| Trench Height | 2" / 48mm |
Whether you choose the Regular or Pro configuration, both boards maintain the core characteristics that have made the KrUzer platform so popular: efficient paddling, easy wave-catching, smooth take-offs, and a surf-inspired feel once on foil.
Key Features
-
Recessed Trench System (RTS) designed specifically for Foil Drive
-
Compatible with Fusion, Max, and Slim systems, as well as other assist systems
-
Available in Regular RTS and Pro RTS configurations
-
Enhanced Connection Window (ECW) for reliable Bluetooth connectivity
-
Mid-length KrUzer V2 platform
-
Fuller nose for improved paddling efficiency and early planing
-
Parallel rail outline for stability and control
-
Thin profile for direct foil feedback
-
Foil Tec moulded EVA traction pad
-
Leash plug and Gore-Tex air vent installed
Kruzer V2 Pro RTS Model Dims:
| Length | Width | Thickness | Volume |
|---|---|---|---|
| 5'3" | 19" | 2 3/4" | 33L |
| 5'6" | 19 7/8" | 2 3/4" | 36L |
| 5'9" | 20 7/8" | 2 3/4" | 39L |
Kruzer V2 Regular RTS Model Dims:
| Length | Width | Thickness | Volume |
|---|---|---|---|
| 5'3" | 19" | 3 1/4" | 38L |
| 5'6" | 19 7/8" | 3 1/4" | 44L |
| 5'9" | 20 7/8" | 3 1/4" | 50L |
All Amos Shapes boards are built start to finish in our Australian factory using EPS foam with PVC reinforcements, carbon vacuum bag construction, and epoxy resins for the best strength-to-weight ratio and long-lasting performance.
Description
KrUzer V2 RTS - An Update on our Mid-Length Foil Drive Board/ Electric Assist
Available for Pre-Order Now!
The KrUzer V2 RTS takes our bestselling platform and adapts it specifically for Foil Drive and other Electric Assist Systems, combining the proven performance of the KrUzer V2 with our Recessed Trench System (RTS).
Built on the same refined mid-length design, the KrUzer V2 RTS delivers easy paddling, early wave entry, and a direct connection to the foil. The RTS integrates the Foil Drive unit into the board, improving weight distribution, reducing drag, and creating a more balanced feel on the water.
All RTS models are compatible with Foil Drive Fusion, Max, and Slim systems, as well as other assist systems, and feature our Enhanced Connection Window (ECW) for reliable Bluetooth connectivity.
Two RTS Options
The KrUzer V2 RTS is available in two configurations, allowing riders to choose the balance of volume, stability, and performance that best suits their riding. This new RTS design allows the rider to unclip and change the battery without undoing mast base plate screws. **Exception - if riding with the fusion system at the front half of the tracks you may need to move your mast to change batteries.
Pro RTS
The Pro RTS follows the same design philosophy as the KrUzer V2 but with a more performance-oriented feel. This version features a half trench design (1' Recessed Track), where the battery sits slightly proud of the board. This allows the board to maintain a thinner, more performance-focused profile, resulting in a lighter, more nimble, and more responsive ride. Riders looking for a more surf-driven experience and a closer connection to the foil will appreciate the added agility of the Pro RTS.
| Specification | Measurement |
|---|---|
| Trench Width | 7 1/4" / 184 mm |
| Trench Height | 1" / 24 mm |
Regular RTS
The Regular RTS is designed for riders who prioritise stability, ease of use, and maximum compatibility with Foil Drive systems. This version features a full trench design (2" Recessed Track), allowing the battery to sit flush with the base of the board for a clean, integrated setup with reduced drag resulting fast take-offs, and a stable platform both on the water and once flying. This board features ample volume throughout the board - for riders looking for the easiest path to getting up and foiling, this is the most user-friendly option.
| Specification | Measurement |
|---|---|
| Trench Width | 7 1/4" / 184 mm |
| Trench Height | 2" / 48mm |
Whether you choose the Regular or Pro configuration, both boards maintain the core characteristics that have made the KrUzer platform so popular: efficient paddling, easy wave-catching, smooth take-offs, and a surf-inspired feel once on foil.
Key Features
-
Recessed Trench System (RTS) designed specifically for Foil Drive
-
Compatible with Fusion, Max, and Slim systems, as well as other assist systems
-
Available in Regular RTS and Pro RTS configurations
-
Enhanced Connection Window (ECW) for reliable Bluetooth connectivity
-
Mid-length KrUzer V2 platform
-
Fuller nose for improved paddling efficiency and early planing
-
Parallel rail outline for stability and control
-
Thin profile for direct foil feedback
-
Foil Tec moulded EVA traction pad
-
Leash plug and Gore-Tex air vent installed
Kruzer V2 Pro RTS Model Dims:
| Length | Width | Thickness | Volume |
|---|---|---|---|
| 5'3" | 19" | 2 3/4" | 33L |
| 5'6" | 19 7/8" | 2 3/4" | 36L |
| 5'9" | 20 7/8" | 2 3/4" | 39L |
Kruzer V2 Regular RTS Model Dims:
| Length | Width | Thickness | Volume |
|---|---|---|---|
| 5'3" | 19" | 3 1/4" | 38L |
| 5'6" | 19 7/8" | 3 1/4" | 44L |
| 5'9" | 20 7/8" | 3 1/4" | 50L |
All Amos Shapes boards are built start to finish in our Australian factory using EPS foam with PVC reinforcements, carbon vacuum bag construction, and epoxy resins for the best strength-to-weight ratio and long-lasting performance.
Choose options